Skip to content
Talk to us directly on WhatsApp
Request a quote العربية
Our Sites (opens in a new tab)

Building and supervision

Construction and finishing supervision

Engineering supervision of building and finishing work: checking work against the drawings, rebar before casting, concrete, masonry and services, with written reports.

No obligation · we reply on WhatsApp

Who it is for

For owners building a house or doing finishing works with a contractor, who want an engineer to check that the work matches the drawings and specifications before anything is poured or covered. Supervision protects your budget: a mistake caught before a pour costs far less than one fixed after it.

What the service covers

  • Checking the work against the structural and architectural drawings.
  • Setting out and excavation.
  • Footings, ground beams and columns.
  • Slabs: formwork, the rebar before casting, the pour and curing.
  • Masonry and openings.
  • Electrical and plumbing rough-in.
  • Finishing works and the hold points before covering.
  • Tracking quantities and the contractor’s payment claims.
  • Written visit reports with photos.

How it runs

  1. Reading the drawings and BOQ
    We go through the drawings, the BOQ and the contractor’s programme before work starts.
  2. A visit plan
    We agree the visit dates and the hold points before which nothing is poured or covered.
  3. Visits and sign-offs
    Each stage is checked at the right time, above all the rebar before every pour.
  4. Reports
    A written report with photos after each visit: what was done and what needs correcting.
  5. Tracking quantities
    Comparing the contractor’s payment claims with the work done and the BOQ.

Checks before work is covered

StageWhat we checkEvidence
Setting out and excavationAxes, levels and excavation sizesMeasurements and photos
FormworkDimensions, alignment, propping and cleanlinessPhotos and measurements
Rebar before castingDiameters, numbers, spacing, cover and lapsPhotos and a sign-off record before the pour
The pourMix, compaction and continuous pouringPhotos and pour notes
CuringKeeping the concrete wet in the first days after the pourWritten follow-up
MasonryAlignment, plumb, bonding and jointsStraightedge and spirit-level measurements

What you receive

Visit reports

Written, with photos, after every visit.

Stage sign-off records

Above all the rebar before every pour.

Quantity tracking

Payment claims compared with the work done.

What this service does not cover. The official supervision certificate a building-permit file requires is a separate legal role governed by the Engineers Syndicate rules. If Z4ENG carries out the works on a project, supervision of that same project is provided by an independent engineer.

Fees are agreed in writing before work starts, according to the scope.

Questions about this service

How often does the engineer visit?

The number and timing of visits are agreed according to the project’s stages, with a visit before every pour to sign off the rebar.

What if you find a mistake in the work?

We record it in the report with photos and the correction needed, and we advise against moving to the next stage until it is corrected.

Do you check the contractor’s payment claims?

Yes. We compare each claim with the work actually done and with the BOQ before you pay.

Ready to start?

Send your unit’s details and photos in two minutes, or message us on WhatsApp.

WhatsApp (opens WhatsApp)