A rebar weight calculator in kg per metre, kg and tonnes: enter the bar diameter, length and number for each row to get the weight per metre, the total weight and how many 12 m bars you need to buy.
Assumptions (you can change them)
The result updates as you type.
Result
Complete the fields to see the result
- Weight of the bars to buy
- — kg
- Weight to buy, in tonnes
- — t
| Diameter | kg/m | Total length of the pieces | Net weight (kg) | 12 m bars |
|---|---|---|---|---|
| 12 mm | — | — | — | — |
- Net weight of your bar list (+ waste)
- — kg
- Net weight in tonnes
- — t
- Total length of the pieces
- — m
Estimates for planning; final quantities after a site visit or a design.
- Rule of thumb: weight (kg/m) = d² ÷ 162. Mill tables give slightly lower values.
- Laps and hooks are not added automatically; pieces longer than 12 m need laps as the drawings show.
- Offcuts can be used for shorter pieces of the same diameter, so the weight you actually buy can be lower.
Your list is long: only the totals and settings are attached to the request. You can send the full list on WhatsApp.
Send the result on WhatsApp (opens WhatsApp)How it is calculated
Weight per metre in kilograms is roughly the diameter in millimetres squared, divided by 162. It is multiplied by the total length for each diameter (length × number), the diameters are added up and the waste is added. This is a common rule of thumb; mill tables based on a steel density of 7850 kg/m³ give slightly lower values (for example 0.888 instead of 0.889 kg/m for 12 mm).
kg/m = d² ÷ 162 · kg = Σ(L × n × d² ÷ 162) × (1 + waste/100)
Bars to buy, allowing for cutting: when a piece is 12 m or shorter, each 12 m bar gives a whole number of pieces equal to 12 ÷ piece length rounded down, and bars = pieces needed ÷ pieces per bar, rounded up. Laps and hooks are not added automatically; add them as the drawings show.
Weight per metre
| Diameter (mm) | Weight (kg/m) | One 12 m bar (kg) |
|---|---|---|
| 8 | 0.395 | 4.74 |
| 10 | 0.617 | 7.41 |
| 12 | 0.889 | 10.67 |
| 14 | 1.210 | 14.52 |
| 16 | 1.580 | 18.96 |
| 18 | 2.000 | 24.00 |
| 20 | 2.469 | 29.63 |
| 22 | 2.988 | 35.85 |
| 25 | 3.858 | 46.30 |
| 28 | 4.840 | 58.07 |
| 32 | 6.321 | 75.85 |
Worked out with the d² ÷ 162 rule of thumb and rounded.
Assumptions
| Assumption | Default |
|---|---|
| Default row | 12 mm diameter, 4.5 m long, 20 pieces |
| Stock bar length | 12 m |
| Waste on weight | 5% |
| Laps and hooks | Not added automatically |
Every value can be changed in the calculator.
Worked example
20 pieces of 12 mm rebar, each 4.5 m long, with 5% waste:
- Total length = 20 × 4.5 = 90 m
- Weight = 90 × 0.889 = 80.0 kg, or 84.0 kg with waste (0.084 t)
- Each 12 m bar gives two 4.5 m pieces (the remaining 3 m is cutting waste), so you need 20 ÷ 2 = 10 bars
Measuring tips
- Take diameters, lengths and numbers from the bar schedule in the structural drawings.
- Give each diameter its own row.
- Add laps and hooks as the drawings show.
- Order a small margin for cutting and losses.
Estimates for planning; final quantities after a site visit or a design.
Common questions
How much does a 12 mm bar weigh?
A 12 m bar of 12 mm weighs about 10.67 kg by the rule of thumb (0.889 kg per metre).
How do I work out the number of bars?
When a piece is 12 m or shorter: pieces per bar = 12 ÷ piece length, rounded down, and bars = pieces needed ÷ pieces per bar, rounded up. Pieces longer than 12 m need laps as the drawings show.
Does the tool work out my slab steel?
It works out the weight from a bar list whose diameters, lengths and numbers you know. The number and spacing of bars in a slab come from the structural design.
