Skip to content
Talk to us directly on WhatsApp
Request a quote العربية
Our Sites (opens in a new tab)

Brick calculator: bricks and mortar for a wall

A brick calculator for walls: enter the wall’s length and height, the area of openings and the wall type (half-brick or one-brick) to get the number of bricks with waste, and the sand and cement for the mortar.

m
m
m²
Wall type
Assumptions (you can change them)
cm
cm
cm
cm
%
kg
kg

The result updates as you type.

Result

Bricks
—
Cement bags
—
Sand
— m³
Net area
— m²
Bricks per m²
— bricks
Wet mortar
— m³
Cement
— kg

Estimates for planning; final quantities after a site visit or a design.

  • The engineer sets the actual mortar mix for the wall type.
Request a quote with these quantities

How it is calculated

Net area = length × height minus openings. Bricks per m² = 1 ÷ ((brick face length + joint) × (brick height + joint)), in metres. In a half-brick wall the face is the brick’s length (25 cm); in a one-brick wall it is the brick’s width (12 cm), because the bricks lie across the wall. Multiply by the area, add waste and round up.

Wet mortar = wall volume minus brick volume. Multiply it by 1.25 to get the dry sand volume, then cement at 250 kg per m³ of sand, divided by 50 kg for the number of bags.

n/m² = 1 ÷ ((f + j) × (h + j)) · bricks = ⌈net × n × (1 + waste/100)⌉

Assumptions

AssumptionDefaultNote
Brick size25 × 12 × 6 cmCheck the size of the bricks you will buy
Joint1 cm
Wall typeHalf-brick (about 12 cm)Or one-brick (about 25 cm)
Waste5%
Dry volume factor for sand1.25
Cement in mortar250 kg per m³ of sandThe engineer sets the actual mix
Bag50 kg

Every value can be changed in the calculator.

Worked example

A half-brick wall 5 m long and 3 m high, with no openings:

  • Net area = 5 × 3 = 15.00 m²
  • Bricks per m² = 1 ÷ (0.26 × 0.07) = 54.95
  • Bricks = 15 × 54.95 × 1.05 = 865.4, that is 866 bricks
  • Wet mortar = 0.316 m³, dry sand = 0.40 m³
  • Cement = 98.9 kg, that is 2 bags of 50 kg

Measuring tips

  • Measure the wall along its centre line, and do each wall separately if its thickness differs.
  • Deduct doors and windows at their real sizes.
  • Keep half-brick and one-brick walls in separate calculations.
  • If your bricks are a different size, change it: the count moves a lot.

Estimates for planning; final quantities after a site visit or a design.

Common questions

How many bricks per square metre?

For a half-brick wall with 25 × 12 × 6 cm bricks and 1 cm joints, about 54.95 bricks per m² before waste. For a one-brick wall, about 109.89.

What is the difference between a half-brick and a one-brick wall?

A half-brick wall is about 12 cm thick and is usually used for internal partitions; a one-brick wall is about 25 cm thick and is usually used for external walls. The design sets the thickness.

How many bags of cement for the mortar?

In the worked example, a 15 m² wall needed about 99 kg of cement, which is 2 bags. The engineer sets the actual mix for the wall type.

WhatsApp (opens WhatsApp)