A paint calculator for one room or a whole apartment: enter the perimeter of the rooms, the wall height, the area of doors and windows and, if you are painting them, the ceilings; then the number of coats and the coverage printed on the can, to get litres and cans.
For a whole flat, add up the rooms.
Enter the floor area if you paint the ceiling, or zero.
Assumptions (you can change them)
From the product data sheet or the can.
The result updates as you type.
Result
Complete the fields to see the result
- Paint
- — L
- Cans
- —
- Wall area
- — m²
- Total area
- — m²
Estimates for planning; final quantities after a site visit or a design.
- Putty and sealer are separate items that this calculator does not include.
How it is calculated
Total area = perimeter × height minus openings, plus the ceiling area. The area is multiplied by the number of coats and divided by the coverage (the square metres one litre covers per coat), then the waste is added. Cans are the litres divided by the can size, rounded up. Putty and sealer are separate items and are not included.
L = (P × H − openings + ceiling) × coats ÷ coverage × (1 + waste/100) · cans = ⌈L ÷ can⌉
Assumptions
| Assumption | Default | Note |
|---|---|---|
| Perimeter | 18 m | For example a 4 × 5 m room; for a flat, add up the rooms |
| Wall height | 2.9 m | |
| Openings | 0 m² | A 0.9 × 2.1 m door is about 1.9 m² |
| Ceilings | 0 m² | If you paint the ceiling, enter the floor area |
| Coats | 2 | |
| Coverage | 10 m² per litre per coat | From the product data sheet; it varies by product |
| Waste | 10% | |
| Can size | 9 L |
Every value can be changed in the calculator.
Worked example
A room with an 18 m perimeter and 2.9 m walls, no openings deducted and no ceiling, two coats at 10 m² per litre:
- Wall area = 18 × 2.9 = 52.20 m²
- Litres = 52.2 × 2 ÷ 10 × 1.10 = 11.5 L
- Cans = 11.5 ÷ 9 = 1.3, that is 2 cans of 9 L
Measuring tips
- Measure each room’s perimeter and add them up for the whole flat.
- Deduct doors and large windows; ignore very small openings.
- A ceiling’s area is roughly the room’s floor area.
- New plaster absorbs more, which is why sealer and putty come before paint.
- Rough or textured surfaces need more than the can says.
Estimates for planning; final quantities after a site visit or a design.
Common questions
How many coats do walls need?
Usually at least two over putty and sealer. Dark colours, or covering a different colour, may need a third.
Does the calculator include putty?
No. Putty and sealer are separate items, each with its own consumption rate; the calculator covers the finishing paint only.
Why is my painter’s figure different?
Coverage varies with the product, the wall and the method, and a painter may include ceilings or putty in one figure. Compare on the same basis, and use the coverage from the product data sheet.
